 |
 |
 |
 |
 |
 |
 |
 |
Masonry
Anchors & Ties |
|
|
 |
 |
 |
 |
 |
| Relief Angle | ||
  |
||
| FAST™ Fero Angle Support Technology |
||
| Faster,
Lower-Cost Shelf Angle Installations The FAST™ system can be used to support masonry veneer of all types. It can also be used to support granite panels and precast concrete. The system is ideal to accommodate construction tolerances because it can provide for adjustability in all directions and it is available in a wide range of sizes. |
||
Product
Data Sheet |
||
 LEED
Letter |
||
Masonry
to Steel |
||
| 2 Piece Column Anchors | ||
| Weld-On |   |
|
| Ties
masonry to steel columns. Welded. Available in:  1/4" DIA.
X 9" Long Finish: Mill Galvanized
|
||
| Product
Data Sheet |
 MSDS
|
|
|
LEED
Letter |
||
| Screw-On |
 
|
|
| Ties
masonry to steel columns. Mechanically fastened Available in: 12 Gauge plate
X 3/4" X 9" longFinish: Mill Galvanized Hot Dip |
||
| Product
Data Sheet |
MSDS |
|
|
LEED
Letter |
||
| Triangular Ties | ||
| Embeddable
triangular ties compatible with T-III anchors. |
|
|
| Product
Data Sheet |
MSDS
|
|
| Notched Column Anchor (Bend Type) |  
|
|
| Ties
CMU to vertical steel columns. Available in: 1-1/2"
wide X 1/8" thick X 7" long with 1-1/2" bend (Right or Left) Finish: Mill Galvanized |
||
| Product
Data Sheet |
MSDS
|
|
| Notched Column Anchor (Corrugated Type) |  
|
|
| Ties
CMU to vertical steel columns. Available in: 1-1/2"
wide X 1/8" thick X 7" long corrugated(Right and Left) Finish: Mill Galvanized |
||
| Product
Data Sheet |
MSDS
|
|
| Back to Top | ||
| Beam Anchors | ||
| Weld-On | 
|
|
| Ties
masonry to steel beams Welded. Available in: 1/4" DIA.
X 9" Long Finish: Mill Galvanized
|
||
| Product
Data Sheet |
MSDS
|
|
| Screw-On | 
|
|
| Ties
masonry to steel beams; mechanically fastened. Available in: 12 Gauge X 3/4"
X 9" longFinish: Mill Galvanized Hot Dip |
||
| Product
Data Sheet |
MSDS
|
|
| Partition Top Anchor (PTA) |  
|
|
| Provides lateral shear resistance at upper limit of walls. Permits vertical movement of slab above, without transferring compression loads to wall below. Plastic tube with expansion filler is placed over rod anchor to allow deflection. Joint is filled with mortar, fully surrounding the tube. | ||
| Product
Data Sheet |
MSDS
|
|
| Back to Top | ||
| Masonry to Masonry | ||
| Intersecting Non-Shear |  
|
|
| Mesh
Ties Ties masonry to masonry for non-bearing and non-shear intersecting perpendicular CMU walls. Available in: 16 gauge - 1/2"
sq x 6" x 14"Finish: Hot Dip |
||
| Product
Data Sheet |
||
| Intersecting Shear | ||
| Z-Straps
Anchors masonry to masonry for intersecting perpendicular CMU walls in shear. Available
in: Finish: |
 
|
|
| Product
Data Sheet |
MSDS
|
|
|
LEED
Letter |
||
| Back to Top | ||
