 |
 |
 |
 |
 |
 |
 |
 |
Brick
Veneer Anchors |
|
|
 |
 |
 |
 |
 |
| Metal Stud Applications | ||||||
 
|
||||||
Fero
(Shear) |
||||||
| The Slotted Stud Tie (Type I) was developed for brick veneer steel stud wall construction where significant differential movement between the veneer and the steel stud backup wall is expected, such as high walls or multi-story buildings with full height veneer. The Slotted Stud Tie (Type I) allows for up to 50 mm (2") of construction adjustability and differential movement between the veneer and the backup wall. Available
in: Standard
Finish: |
||||||
 Product
Data Sheet |
||||||
LEED
Letter |
||||||
|
||||||
| Screws (For Fero Ties) |   |
|||||
| Hex
Washer Head 1/4" X 7/8" Self Drilling (Tek) with attached
neoprene washer. Finish: Climaseal coated |
||||||
| Product
Data Sheet |
 MSDS
|
|||||
Two
Piece Assemblies |
||||||
| Type III |   |
|||||
| Surface
mounted/anchor in tensions/no rigid cavity insulation. Available in: 
Standard 14 Gauge x 1-1/4" x 6"Standard Finish:
Hot Dip |
||||||
| Product
Data Sheet |
MSDS
|
|||||
| Tri-Ties | ||||||
| Embeddable
triangular ties compatible with Type-III anchors. Available in: Standard 3/16" diameter (.187 in) x length 3/16" x
3" 3/16" x
4" 3/16" x
5" 3/16" x
6 " 3/16" x
7" 3/16" x
9" 3/16" x
11" Standard Finish: Hot Dip |
 |
|||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
Letter |
||||||
| Type III - Seismic System |  |
|||||
| Type
III Anchor Surface mounted/anchor in tensions/no rigid cavity insulation. Available in:
Standard 14 Gauge x 1-1/4" x 6"Standard Finish:
Hot Dip |
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
Letter |
||||||
| Seismic
Tri-Ties Embeddable triangular ties compatible with Type-III anchors. Available in: Standard 3/16" diameter (.187 in) x length 3/16" x
3" 3/16" x
4" 3/16" x
5" 3/16" x
6 " 3/16" x
7" 3/16" x
9" 3/16" x
11" Standard Finish: Hot Dip |
  |
|||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
Letter |
||||||
| Metal Stud Applications | ||||||
| RJ711
(Standard) |
Seismic
Available |
|||||
| Surface mounted/anchor in tension/no rigid cavity insulation. Available
in: |
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
Product
Data Sheet - Seismic |
||||||
| RJ711
(Cavity Metal Stud) Standard
insulation leg length: |
 
|
|||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
Letter |
||||||
| HCL 711 (Cavity Metal Stud) |  |
|||||
| Surface
mounted/pronged positive contact with stud with rigid insulation. |
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
Wire-Bond
Data Sheet |
LEED
Letter |
|||||
| Type III X Screw On Anchor |  
|
|||||
| Installs
quickly and easily on exterior walls with brick veneer. Provides
positive contact with metal studs. |
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
Letter |
||||||
| Type III X- Seismic System | 
 |
|||||
| Installs
quickly and easily on exterior walls with brick veneer. Provides positive
contact with metal studs. Transfers compression loads to the steel stud backup. Available in:
Standard 14 Gauge Standard insulation leg length:
Non-insulated cavity application
1" rigid cavity insulation
1-1/2" rigid cavity insulation
2" rigid cavity insulation 2-1/2"
rigid cavity insulation 3" rigid
cavity insulation Standard Finish:
Hot Dip |
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
Letter |
||||||
| Seismic
Tri-Ties Embeddable triangular ties compatible with Type-III anchors. Available in: Standard 3/16" diameter (.187 in) x length 3/16" x
3" 3/16" x
4" 3/16" x
5" 3/16" x
6 " 3/16" x
7" 3/16" x
9" 3/16" x
11" Standard Finish: Hot Dip |
|
|||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
Letter |
||||||
| Screws | ||||||
| For Two Piece Assemblies (Metal Stud) |  (Metal Stud) |
|||||
| #10
X 1-1/2" Hex Washer Head Self Drilling (Tek) with attached neoprene
washer. Finish: Climaseal Coated |
||||||
| Product
Data Sheet |
MSDS |
|||||
| Scots® Stainless Steel Head (Metal Stud) | 
(Metal Stud) |
|||||
| 12 X1-7/8" Hex Washer Head Scots® Teks 3 Fastener. Self Drilling (Tek) with attached neoprene washer. Drill point #3. Finish: |
||||||
| Product
Data Sheet |
MSDS |
|||||
|
LEED
Letter |
||||||
| For Brick Veneer Ties (Wood Stud) |  (Wood Stud) |
|||||
| #9
X 2" Hex Washer Head with attached neoprene washer. Attaching
brick veneer anchors. Finish: Climaseal Coated
|
||||||
|
Product
Data Sheet |
MSDS |
|||||
| |
||||||
| New Construction Poured Concrete Wall Applications | ||||||
| Dovetail Slot |
|
|||||
| Tie
veneer to a poured concrete wall. Available in: 24 gauge x 10'
w/foam fillerFinish: Mill galvanized |
||||||
|
Product
Data Sheet |
MSDS |
|||||
|
LEED
Letter |
||||||
| Dovetail Tri-Ties (Non Cavity & Cavity) | ||||||
| Embedded
into slot/anchor in tension. Available in: 12 gauge dovetail
w/standard 3/16" diameter (.187 in) x length attached tri-ties 3/16" x
3" 3/16" x
4" 3/16" x
5" 3/16" x
6 " 3/16" x
7"Standard Finish: Hot Dip
|
|
|||||
| Product
Data Sheet |
MSDS |
|||||
|
LEED
Letter |
||||||
| Back to Top | ||||||
| Existing Construction CMU/Concrete Substrate Applications | ||||||
| RJ711 (Standard) |
|
|||||
| Tying
brick veneer to CMU or Concrete Substrate without rigid insulation. Available in: 14 Gauge X
ABV2002 for standard veneer with narrow cavity w/ 3/16" X 3" pintle tie Finish:
Hot Dip |
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
Please call for
Product Data Sheet- Seismic |
||||||
 |
||||||
| RJ711
(Rigid Cavity Insulation) |
||||||
| Product
Data Sheet |
MSDS
|
|||||
| Please
call for Product Data Sheet
- Seismic |
LEED
Letter |
|||||
| Concrete/CMU Expansion Pins |    
|
|||||
| This
Zamac Hammer-Screw is unique, one-step drive anchor featuring a Phillips
type head and a screw thread for use in concrete, block, brick or
stone.
Available in: Finish: |
||||||
| Product
Data Sheet |
MSDS |
|||||
| Back to Top | ||||||
| |
||||||
| Wood Framing (to 28'-0") | ||||||
 
|
||||||
| Corrugated Wall Ties | ||||||
| 22
GA corrugated wall ties - hot dip |
||||||
| Product
Data Sheet |
MSDS |
|||||
| Screws - For Brick Veneer Ties (Wood Stud) | (Wood Stud) |
|||||
| #9
X 2" Hex Washer Head with attached neoprene washer. Attaching
brick veneer anchors. Finish: Climaseal Coated
|
||||||
|
Product
Data Sheet |
MSDS |
|||||
| 8D Nail Hot Dip - Per Code! | ||||||
| 8D
2-1/2" long Finish: |
|
|||||
| Product
Data Sheet |
MSDS
|
|||||
| Back to Top | ||||||
MASONPRO,
Inc.
1-800-659-4731
© 2001 - 2010 Masonpro, Inc.