 |
 |
 |
 |
 |
 |
 |
 |
Air
Vapor Barrier/Waterproofing |
|
|
 |
 |
 |
 |
 |
| AVB - Air Vapor Barrier | ||||||
  Part A Part B 
|
||||||
| Perm-A-Barrier® Liquid | ||||||
| Spray
applied air and vapor barrier for Cavity walls. Perm-A-Barrier® Liquid is a two component, synthetic rubber, cold-vulcanized, fluid applied air and vapor barrier membrane. It cures to form a resilient, monolithic, fully bonded elastomeric sheet, protecting above grade wall assemblies against the damaging effects of air, vapor and water ingress. Perm-A-Barrier Liquid provides an effective barrier against air infiltration and exfiltration while minimizing the associated energy loss and condensation problems and its versatility makes it easy to use in detailed areas. Available in:  Part A &
Part B kit |
||||||
 Product
Data Sheet |
MSDS
- Part AMSDS - Part B |
|||||
|
||||||
| Perm-A-Barrier® VP | ||||||
| Perm-A-Barrier® VP is vapor permeable for wall assemblies requiring this breathable characteristic. As a vapor permeable membrane, Perm-A-Barrier VP permits the transfusion of water vapor that may otherwise condense in the wall structure; but is impermeable to liquid water, which allows the material to act as a water drainage plain. | ||||||
| Product
Data Sheet |
MSDS
|
|||||
LEED
|
||||||
| Perm-A-Barrier® Detail Membrane |
|
|||||
| Ideal
for protecting and sealing critical areas of the building superstructure
from the damaging effects of the elements. By minimizing air and water
vapor flow through the building exterior at transition areas, Perm-A-Barrier
Detail Membrane seals transition and detail areas to provide a continuous
air barrier and Prevents premature deterioration of the building envelope.
Perm-A-Barrier Detail Membrane is part of the full Perm-A-Barrier
system for commercial applications. Available in: 6" x 75'
Rolls 9" x 75'
Rolls 12" x 75'
Rolls Available in Winter & Summer Grade |
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
|
||||||
| Vycor® Plus | 
|
|||||
| Provides
superior protection against water, air and moisture infiltration in
window and door openings, corner boards, under stucco finishes, masonry
walls and other flashing areas. It is designed to work in severe winter
climates, milder climates, and in coastal areas where wind driven
rain is common. It should not be used on roofs. Grace Vycor® Plus
is ideal for sealing joints, seams, holes, and other unwanted openings
in wall sheathing systems. It is 25 mil thick and compatible with
wood, plywood, oriented strand board, concrete and masonry and fully
adheres to the substrate to prevent water from passing through and
into the substrate. Available in: 4" x 75'
Rolls 6" x 75'
Rolls 9" x 75'
Rolls |
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
|
||||||
| Membrane AVB - Air Vapor Barrier | ||||||
| Wall Membrane - Above Grade |
|
|||||
| Self-adhesive,
rubberized asphalt/polyethylene waterproofing membrane for air and
vapor barrier applications. Available in: 36" x 75'
Rolls |
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
|
||||||
| WB Primer |   |
|||||
| High
tack, water-based primer for use with Perm-A-Barrier Wall Membrane
on cementitous and exterior gypsum wall boards. Works great on DensGlass Gold! Available in: 5 Gallon pail
|
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
|
||||||
| Bituthene® Primer B2 |  |
|||||
| Used
to prime CMU or concrete substrates. Available in: 5 Gallon pail
|
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
|
||||||
| Dampproofing | ||||||
  
|
||||||
| Hydrocide 700B Semi-Mastic: (Brush or Spray) | ||||||
| Is
a cold-applied water-based emulsified-asphalt dampproofing and vapor-retarding
coating for use on "green" or slightly damp surfaces. Hydrocide
700B is reinforced with short fibers for application by brush or spray. Available in: 5 Gallon pail
|
||||||
| Product
Data Sheet |
MSDS
|
|||||
| Waterproofing | ||||||
| Below Grade | ||||||
|
||||||
| Bituthene® 4000 System - Below Grade | ||||||
| Self-adhesive
HDPE waterproofing membrane with super tacky compound for use with
patented, water-based System 4000 Surface Conditioner. Available in: 36" x 75'
Rolls |
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
|
||||||
| Surface Conditioner |
 |
|||||
| Bituthene
System 4000 Surface Conditioner is a water based surface conditioner
specifically formulated to prepare concrete, masonry and wood surfaces for the System 4000 Waterproofing Membrane. Its VOC content is 125 g/L. Available in: One gallon |
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
|
||||||
| Bituthene®
Mastic (for both Above Grade and Below Grade Applications) |
 |
|||||
| A
rubberized asphalt-based mastic. It has excellent adhesion to structural
concrete, masonry and wood and is designed to seal terminations, edges
of patches, and overlaps in detail areas. It is an integral part of
the Bituthene Waterproofing System, though it should not be used as
a primary waterproofing material. Available in: Quart tube |
||||||
| Product
Data Sheet |
MSDS
|
|||||
|
LEED
|
||||||
| Thoroseal® | 
|
|||||
| A
portland-cement-based waterproof coating for concrete and masonry.
Thoroseal® resists both positive and negative hydrostatic pressure,
enabling it to waterproof both interior and exterior surfaces. It
fills and seals pores and voids, correcting surface irregularities
and eliminating the need for concrete rubbing. Thoroseal® creates
a low-cost, low-maintenance, highly durable water barrier that is
resistant to damage from impact, abrasion, and mildew. Available in: 50 lb bag |
||||||
| Product
Data Sheet |
MSDS
|
|||||
| Water Repellant | ||||||
| Dry-Brick™ |  |
|||||
| Formulated
with Grace's patented technology, DRY-Brick |
||||||
| Product
Data Sheet |
MSDS
|
|||||
| Back to Top | ||||||
