 |
 |
 |
 |
 |
 |
 |
 |
Joint
Material |
|
|
 |
 |
 |
 |
| Expansion Joint (EJ) | ||
  
|
||
| 1056 Joint Filler (Brick EJ) | ||
| 1056
is a filler for brick expansion joints. It is made up of closed cell
expanded rubber and is black in color. Includes abrasion and low temperature
resistance. Available in:  Standard: 3/8"
x 3" x 50' (perferated every 3" o.c.) Custom sizes
available |
||
 Product
Data Sheet |
 MSDS
|
|
 |
||
| #1380 Expand-O-Foam - Expansion Joint Filler | ||
| Expanded,
closed cell, plank, polyethylene foam. Economical, lightweight,
flexible, compressible, resilient, non-absorbent, inherent bond
breaker. |
||
|
Product
Data Sheet |
MSDS
|
|
LEED |
||
  |
||
| Greyflex | ||
| An
economical, high-performance expanding foam secondary sealant to field-applied
liquid sealant. Available in: 1/8" to
6" wide joint openings |
||
|
Product
Data Sheet |
MSDS |
|
 |
||
| 25V | ||
| Long
term, high-performance seal for above grade wall joints in concrete,
brick, stone, etc. where black reveal or shadow-line effect is desired. Available in: 1/4" to
4" wide joint openings |
||
|
Product
Data Sheet |
MSDS
|
|
| Colorseal |  Colorseal in typical installation - Substrates may vary. 
Colors Shown: Limestone, Adobe Tan & Rustic Brick |
|
| Acrylic
impregnated expanding foam sealant and closed-cell (EVA) foam into
a unified binary sealant system. Colorseal can be used in vertical and horizontal joints in building facades of precast concrete, brick, natural stone, metal and most other substrates. Available in standard colors: Precast White, Natural Stone, Limestone, Gray, Black, Bronze, Sandstone, Adobe Tan, Dusty Rose, Rustic Brick, Blue Spruce & Charcoal Available in: 1/2" to
8" wide joint openings |
||
|
Product
Data Sheet |
MSDS |
|
|
LEED
|
||
 
 |
||
| Watson
Bowman WE Series Compression Seal |
||
| Expansion
joint seal for general horizontal and vertical construction. Available in: 1/2" to
5-1/8" wide joint openings |
||
|
Product
Data Sheet |
MSDS - Not Applicable |
|
| Back to Top | ||
| Control Joint (CJ) - CMU | ||
| No. 15 lb Felt (Michigan Control Joint) |   |
|
|
Product
Data Sheet |
MSDS
|
|
|
N/A |
||
| 1056 Joint Filler (CMU CJ) |
|
|
| 1056
is a filler for block control joints. It is made up of closed cell
expanded rubber and is black in color. Includes abrasion and low temperature
resistance. Available in: Standard: 3/8"
x 12" x 50' (perferated 1" o.c.) Custom sizes
available |
||
| Product
Data Sheet |
MSDS
|
|
| PVC Control Joint |
|
|
| Extruded
from a specially formulated PVC compound with 85 durometer hardness
conforming to ASTM D2287 Type 654, ASTM D 2240. It is designed for
use in CMU construction. Available in: Standard 2-5/8"
w/ 1/4" and 5/8" flanges x 48" |
||
| Product
Data Sheet |
MSDS
|
|
|
LEED |
||
| Rubber Control Joint | ||
| It
is designed for use in CMU construction. Rubber control joints allow
for expansion and contraction of masonry walls while reducing the
possibility of air and water penetration. -85 durometer hardness conforming to ASTM D2000 2 AA 805, ASTM D2240 Available in: Standard 2-5/8"
w/ 1/4" and 5/8" flanges x 48" |
||
| Product
Data Sheet |
MSDS
|
|
|
LEED |
||
| Back to Top | ||
| |
||
| Compression Joint | ||
Click to view
larger image |
||
| Compression Joint Filler |  |
|
| A
filler for brick expansion joints. It is made up of closed cell expanded
rubber and is black in color. Available in: 1/4" x
3" with one sided self adhesiveRolls - Material is scored to tear to size |
||
| Product
Data Sheet |
MSDS |
|
| Back to Top | ||
| Column Wrap | ||
| Column
Boxboard The column boxboard is used as an isolation material between the structural column and the masonry wall construction. This separation is necessary to prevent the masonry from coming in contact with the displaced column during loading and to prevent mortar from being within the same joint. This product is a cellulose material coated on the weathering side and can be factory scored or scored in the field for bending or breaking to fit any column shape. The thickness of the roll product is 1/4", while the sheet product is available at either 1/4" or 1/2" thickness. Available in: Rolls: Standard
1/4" x 48" x 250' |
 
|
|
| Product
Data Sheet |
MSDS
|
|
| . | ||
| Back to Top | ||
| Joint Sealants | ||
  
|
||
| NP1™ | ||
| NP
1™ is a one-component, high-performance, non-priming, gun-grade,
elastomeric polyurethane sealant. It requires no mixing and typically
requires no priming to bond to many materials, including concrete
and masonry. Available in: 10 oz. tube |
||
| Product
Data Sheet |
MSDS
|
|
NP1
Colors  Click to view larger image |
||
 |
||
| Polyethylene Backer Rod | ||
| An
ideal non-absorbent compressible backup material. It is inserted into
a joint to control sealant depth to create a backstop to: -Allow proper sealant tooling -Allow proper sealant wetting of the joint surfaces -Yeild a proper bond breaker between the Backer Rod and sealant Diameters Available in: 1/4", 3/8",
1/2" & 5/8" |
||
|
Product
Data Sheet |
MSDS
|
|
|
LEED |
||
| Back to Top | ||
