Rebar - Commercial

On-Line Store
Enter here!

Rebar/Grouting


*Featured Product:*
Grout Scoop
Scoop, Pass, Pour For a faster, easier and cleaner method of grouting, no more wall stains. Product weighs under 3 lbs empty and approx. 45 lbs full. Saves time (up to 50% faster), transfer up to 0.5 cubic feet of material with each scoop. Designed for the user and ergonomically friendly. Made from high-density HDPE plastic, the Grunt will withstand your toughest jobs.
Click here for more info!	Grout Grunt Video


Rebar

Grade 60 ASTM A615
#4, #5, #6, #7 & #8 (cut to any length)
#4 Product Data Sheet #5 Product Data Sheet #6 Product Data Sheet #7 Product Data Sheet #8 Product Data Sheet	MSDS
	LEED Letter



Anchor Bolts
Used to attached the parapet nailer on the CMU wall.
Hot Dip Finish Available in: 1/2" x 6" w/ Nut & Washer 1/2" x 8" w/ Nut & Washer 1/2 x 12" w/ Nut & Washer 1/2 x 14" w/ Nut & Washer
Product Data Sheet	MSDS


Core Lock
-Diagonal placement in block insures rebar is automatically centered in core every time and prevents any movement. -Rebar positioner is "seated" 1-1/4" deep into core of CMU. -One-piece, no weld design. -Does not interfere with installation of wire joint reinforcement. Available in: Single: No. 9 Gauge X 8" CMU No. 9 Gauge X 12" CMU Double: No. 9 Gauge X 8" CMU No. 9 Gauge X 12" CMU Also available in 10", 14" & 16"
Product Data Sheet	MSDS
	LEED Letter


Rebar Positioners
Holds the rebar in position until the grout is set. Available in: No. 9 Gauge X 8" CMU No. 9 Gauge X 10" CMU No. 9 Gauge X 12" CMU Also available in 14" & 16"
Product Data Sheet	MSDS
	LEED Letter






Epoxy - T308+
T308+ is a two-component epoxy adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The T308+ is designed for bonding threaded rod and reinforcing bar into drilled holes in concrete base materials.
Product Data Sheet	MSDS


Zap Screwlock
For mechanically joining deformed reinforcing bars, special steel sleeves applied over rebars on-site. Connection achieves the specified ultimate tensile strength as well as the yield strength of the bars themselves, as required by design codes in the United States.
Product Data Sheet	MSDS
	LEED Letter


Rebar Safety Caps
Protects from hazard of impalement from heights of up to 7 ½ feet. Designed with metal plate molded into 4 inch by 4 inch square top. OSHA Approved!
Product Data Sheet








Tie Wire
-Tie rebar laps -Tie insulated blankets together -Tie winter protection to the scaffolding Available in: 3.5lb Roll
Product Data Sheet


Back to Top


Grouting

Grout Stop
Creates a barrier that stops the flow of grout when filling block wall cells while maintaining positive bond in the mortar joint. This is an effective way to limit solid grouting to upper block courses. Available in: 6" for 8" CMU X 100' Rolls 10" for 12" CMU X 100' Rolls
Product Data Sheet	MSDS
	LEED Letter


Ultra Grout Stop
Creates a high strength barrier that stops the flow of self consolidating grout when filling block wall cells while maintaining positive bond in the mortar joint. This is an effective way to limit solid grouting to upper block courses. Available in: 6" for 8" CMU X 50' Rolls 10" for 12" CMU X 50' Rolls
Product Data Sheet	MSDS
	LEED Letter


Grout Scoop
Scoop, Pass, Pour For a faster, easier and cleaner method of grouting, no more wall stains. Product weighs under 3 lbs empty and approx. 45 lbs full. Saves time (up to 50% faster), transfer up to 0.5 cubic feet of material with each scoop. Designed for the user and ergonomically friendly. Made from high-density HDPE plastic, the Grunt will withstand your toughest jobs.
Click here for more info!	Grout Grunt Video



Smart-T Bolt
Used to form clean-out covers for High Lift grouting.
Product Data Sheet




Grout Pump GP-2HD
Hand operated; no electric or air power source needed. Easy to operate, minimal maintenance required. Pumps most types of cementitious grout (not for epoxy-type grouts) Makes an ideal tool for placing grout anywhere that high pressure is not required. Lightweight and compact. Pump Type: Single Diaphragm, Self-Priming Power Source: Hand Operated Output Capacity: 6 gallons/minute (48 cu. ft./hr) Output Pressure: 0 to 15 psi Hopper Capacity: 4.6 gallons Discharge Head: 10 foot Vertical Lift Net Weight: 21 pounds Placement Hose Size: 1-1/2" ID by 60" long, Clear Vinyl -Optional 3/4" hose reducer kit Output and performance will vary depending on cycle rate, viscosity of the grout mixture and pressure conditions.


Back to Top

MASONPRO, Inc. 1-800-659-4731