 |
 |
 |
 |
 |
 |
 |
 |
Repellants/Sealants |
|
|
 |
 |
 |
 |
 |
| Repellants | ||
| Burnished Block Sealer |   
|
|
| Phylon
1422 Phylon 1422 is a non-yellowing acrylic sealer that provides a tough, "wet" look finish for washed aggregate, ground face block, split rock, sandblasted concrete and masonry. Available in:  5 Gallon pail
|
||
 Product
Data Sheet |
 MSDS |
|
 Leed
Letter |
||
| Sure Klean® Weather Seal Siloxane WB Concentrate | 
  |
|
|
Is a water repellent concentrate designed for dilution with fresh
water at the jobsite. This solvent-free blend of silanes and oligomeric
alkoxysiloxanes mixes easily with water to produce a penetrating water
repellent ideal for application to dense or porous masonry surfaces.
Weather Seal Siloxane WB can also be used as a primer to even out
porosity and improve adhesion of BMC® Breathable Masonry Coatings. Available in: 1 gallon pail
|
||
| Product
Data Sheet |
MSDS
|
|
 |
||
| Prime-A-Pell 200 | ||
| Clear,
penetrating masonry water repellant for above-grade concrete, stucco,
brick and concrete masonry walls. Available in: 5 gallon pail |
||
| Product
Data Sheet |
MSDS |
|
|
LEED
Letter |
||
| Dry-Brick |   |
|
| Formulated
with Grace's patented technology, DRY-Brick is a liquid, integral water-repellent admixture for masonry mortar. When DRY-BRICK Mortar Admixture is added at its recommended dosage rate, there is a dramatic reduction in the wicking property (the amount of water absorbed) of masonry mortar. As an integral admixture, DRY-BRICK provides water repellency throughout the depth of the mortar joint. Available in: 1 quart bottle |
||
| Product
Data Sheet |
MSDS
|
|
| Back to Top | ||
| Sealants | ||
| NP 1™ |   
|
|
| NP
1™ is a one-component, high-performance, nonpriming, gun-grade,
elastomeric polyurethane sealant. It requires no mixing and typically
requires no priming to bond to many materials, including concrete
and masonry. Available in: 10 oz. tube |
||
| Product
Data Sheet |
MSDS |
|
NP1
Colors  Click to view larger image |
||
| Polyethylene Backer Rod |  |
|
| An
ideal non-absorbent compressible backup material. It is inserted into
a joint to control sealant depth to create a backstop to: -Allow proper sealant tooling -Allow proper sealant wetting of the joint surfaces -Yeild a proper bond breaker between the Backer Rod and sealant Diameters Available in: 1/4", 3/8", 1/2" & 5/8" |
||
|
Product
Data Sheet |
MSDS |
|
|
Leed
Letter |
||
| NP 2™ (Special Order) |
|
|
| NP 2™ is a two-component, highly flexible, nonpriming, high-performance polyurethane sealant. It has been successfully tested for joint movement of plus or minus 50%. |  
|
|
|
Product
Data Sheet |
MSDS: Base Activator Pigments |
|
NP2
Colors Click to view larger image |
||
| Back to Top | ||