Masonpro Home
 On-Line Store
Home
On-Line Store Products Masonry Resources Information Request Contact Us About Us

 
Product Data/LEED/MSDS
     
Thru-Wall Flashing  
   
Copper    
   
Copper Fabric & Copper Coated

Advanced logo

Copper Fabric

Copper Fabric

The highest quality laminated copper flashing on the market today. Two layers of dense glass fabric and a special blended asphalt are laminated to the copper core to produce greater tensile strength and improved puncture resistance. This composition of copper, glass fabric and asphalt will ensure a permanent bond in the mortar joint and protection from moisture.

Available in:
3, 5 & 7 oz.
16", 18", 24" or 36" wide rolls x 25' long.
 Will slit to multiple widths
Product Data Sheet Product Data Sheet MSDS MSDS
 
   
   
   
   
 
     
 
Advanced logo

Cop-R-Kraft Duplex
Cop-R-Kraft Duplex

A full copper sheet bonded between two layers of waterproofed, creped kraft paper with a plasticized asphalt compound. The 3 and 5 oz. weights are reinforced with a woven glass fabric scrim to meet GSA, FHA and Corps of Engineers specifications. This strong but flexible masonry flashing will give you economical and permanent moisture protection.

Available in:

3 oz. & 5 oz.
18", 24" or 36" wide x 60' Rolls

Product Data Sheet Product Data Sheet MSDS MSDS  
   
     
   

  Advanced logo

 Cop-R-Tite Mastic

Cop-R-Tite Mastic  

This unique fibrated mastic was developed to insure the proper sealing characteristics of copper laminated flashings. Cop-R-Tite Flashing Mastic is a compounded composition of asphalt, mineral stabilizers, and interfibe. It is manufactured to a trowel grade consistency which will provide a durable, elastic coating highly resistant to weathering while providing excellent adhesion properties. Cop-R-Tite Flashing Mastic performs well over a wide range of temperature and weather conditions. It complies with all requirements of Federal Specifications SS-C-153, Type 1 and ASTM 02822, Type 1 and SSPC No. 12.   

Available in:
5 Gallon Pail
Quart Tubes

Product Data Sheet Product Data Sheet MSDS MSDS  
   
     
Hyload - 40 Mil cloaked flashing
Hyload logo

Flashing w/ Pressure Bar

Hyload - End Dam
Hyloand - Corners
End Dam
Corners

 

Surface Adhered (S/A) Membrane - to be specified when the flashing system cannot be built in to the back-up wythe or where the construction allows for the S/A Membrane to be adhered to the surface of the back-up wall, i.e. dry wall, poured concrete, block, wood, and metal.

Available in:
12", 16", 18", 24" or 36" X 75' Rolls
End Dams - Right & Left
Corners - Inside & Outside

Available in the following colors:

Flashing Color Swatch
Product Data Sheet Product Data Sheet MSDS MSDS
Inside, Outside Corners & End DamsInside, Outside Corners      & End Dams LEED Letter LEED
        
Back to Top    

   
Perm-A-Barrier® (Rubberized Asphalt)  
   
Perm-A-Barrier®

Grace logo

Perm-A-Barrier®

Click here for Details &
Isometric Drawings

Perm-A-Barrier® is a self-adhering, rubberized asphalt and polyethylene composite membrane that provides dual protection against water intrusion when applied to masonry walls. It's high-density polyethylene composition resists punctures, tears, abrasion, corrosion and is self-healing. Perm-A-Barrier adheres to masonry, steel, concrete, block, gypsum and wood substrates.

Available in:
12", 18", 24" or 36" wide x 75' Rolls
Product Data Sheet Product Data Sheet MSDS MSDS
 
   
 
   
Bituthene Mastic
Grace logo
Bituthene Mastic
Bituthene Mastic

A rubberized asphalt-based mastic. It has excellent adhesion to structural concrete, masonry and wood and is designed to seal terminations, edges of patches, and overlaps in detail areas. It is an integral part of the Bituthene Waterproofing System, though it should not be used as a primary waterproofing material.

Available in:
Quart tube

Product Data Sheet Product Data Sheet MSDS MSDS
Click Here to Purchase On-Line! LEED Letter LEED
 
   
   
   
   
 
   
Surface Conditioner
Grace logo
Surface Conditioner
A water-based latex surface treatment that is specifically formulated to bind site dust and concrete efflorescence, thereby providing a suitable surface for the adhesion of Perm-A-Barrier Wall Flashing.

Available in:
One gallon
Product Data Sheet Product Data Sheet MSDS MSDS
 
   
Back to Top  

     
EPDM    
     
Firestone - 40 MIL  
Firestone Flashgard logo
Firestone Flashgard
FlashGard Thru-Wall
High performance, flexible membrane alternative for protecting masonry walls from water penetration. It is based on EPDM (ethylene propylene diene terpolymer) synthetic rubber. FlashGard Membrane forms a barrier to moisture ingress in cavity wall construction by directing water to a building's exterior.

Available in:

12", 16", 18", 20", 24" or 36" wide X 50' Rolls
Product Data Sheet Product Data Sheet MSDS MSDS
 
     
     
Seam Tape
Firestone Flashgard logo

Adhesive Tape
Firestone FlashGard Adhesive Tape
Designed for splicing of FlashGard membrane panels and for attaching FlashGard membrane to substrates as allowed by Firestone FlashGard Thru-Wall Flashing specifications.

Available in:
1-1/2" x 50' Rolls (Two-sided)

Product Data Sheet Product Data Sheet
Click Here to Purchase On-Line! LEED Letter LEED
     
     
Seam Sealant
Firestone Flashgard logo

Water Block Seal S20
Water Block Seal (S-20)
Designed to provide a seal when used in compression as required by Firestone details.

Available in:
10 oz. tube
Product Data Sheet Product Data Sheet MSDS MSDS
Click Here to Purchase On-Line!
   
   
Back to Top  

     
S/S Flashing    
     
Metal Drip Edge Flashing  
   
Lap Rite - Metal Drip Edge Flashing
FS1010
FS1010
 
   
Hemmed Drip Edges
(use in conjunction with other membrane or laminated flashings)

Finish:

28 Gauge
Metal - Type 304 / 2D ASTM A 167 & ASTM A 240

Available in:
3" x 1/2" x cut to length
Please call for custom sizes
Click on image below for
Installation Procedure
Installation Procedure
Product Data Sheet Product Data Sheet MSDS MSDS
Field Notes Field Notes:
      Metal Drip Edge Field Note
LEED Letter LEED
 
 
     
Thru Wall Flashing    

 FS1030

FS1030
FS1020
FS1020
Stock Profiles
  Thru-Wall Profiles
Thru-Wall Profiles
     
Hemmed Drip Edges
(use in conjunction with other membrane or laminated flashings)

Finish:

28 Gauge
Metal - Type 304 / 2D ASTM A 167 & ASTM A 240
Please call for custom sizes
Product Data Sheet Product Data Sheet MSDS MSDS
Field Notes Field Notes:
      Metal Coping Field Note
LEED Letter LEED
      Metal Drip Edge Field Note
      Metal Laping Field Note
      Inside, Outside Corners & End Dams
      
   
   
Lap Rite  
Lap Rite™ is a one part non-skinning butyl metal flashing sealant.

Available in:
10 oz. tube
Product Data Sheet Product Data Sheet MSDS MSDS
Field Notes Field Notes: LEED Letter LEED
      Metal Coping Field Note
      Metal Drip Edge Field Note
      Metal Laping Field Note
Click Here to Purchase On-Line!  
Back to Top  

   
Pressure bar photo
Termination Bar - Mill Galv
 
Termination Bar - PVC
 
Termination  Bar - Stainless Steel
Termination Bar - Aluminum

Termination Bar  
   
Termination Bar  

Securing flashing edge to the wall.

Available in:
Mill Galvanized
1/8" X 1-1/4" with 5/16" diameter holes 16" oc.

PVC
1/8" X 1-1/8" with 5/16" diameter holes 16" oc.

Stainless Steel
1/8" X 1" with 5/16" diameter holes 16" oc.

Aluminum
1/8" X 1" with 5/16" diameter holes 16" oc.

Product Data Sheet Product Data Sheet - MG MSDS MSDS - Mill Galv
  LEED Letter LEED - MG
   
Product Data Sheet Product Data Sheet - PVC MSDS MSDS - PVC
  LEED Letter LEED - PVC
   
Product Data Sheet Product Data Sheet -
      Stainless Steel
MSDS MSDS - Stl/Stl
  LEED Letter LEED - Stl/Stl
   
Product Data Sheet Product Data Sheet-
      Aluminum
MSDS MSDS - Aluminum
 
   
   
Screws/Fasteners  
   
Fasteners for CMU and Concrete Backup
Powers Fasteners logo

Hammer Screw Expanison Pins

Expansion Pins
This Zamac Hammer-Screw is unique, one-step drive anchor featuring a Phillips type head and a screw thread for use in concrete, block, brick or stone.

Available in:
1/4" X 1-1/4" Hammer drive anchor

Finish:
Electro Galvanized

Product Data Sheet Product Data Sheet
  LEED Letter LEED
   
     
   


ITWBuildex logo
#10 screw
(Metal Stud)
Fasteners for Metal Stud Backup
#10 1-1/2" HWH Tek screw with Neo washer
#10-14 X 1-1/2" Hex Washer head Self Drilling (Tek) with attached neoprene washer.

Finish:
Climaseal coated
Product Data Sheet Product Data Sheet MSDS MSDS
   
     
     
Scots® Stainless Steel Head (Metal Stud)
ITWBuildex logo
Scots Stainless Steel Head Screw
(Metal Stud)

12-14 x 1-7/8" Hex Washer Head Scots® Teks 3 Fastener. Self Drilling (Tek) with attached neoprene washer. Drill point #3.

Finish:
Stainless Steel Head

Product Data Sheet Product Data Sheet MSDS MSDS
  LEED Letter LEED  
     
   


ITWBuildex logo

#9 screw
(Wood Stud)
Fasteners for Wood Stud Backup
#9 X 2" Hex Washer head Self Drilling (Tek) with attached neoprene washer.

Finish:
Climaseal Coated
Product Data Sheet Product Data Sheet MSDS MSDS
 
     

  MASONPRO, Inc.  1-800-659-4731

 © 2001 - 2011 Masonpro, Inc.