 |
 |
 |
 |
 |
 |
 |
 |
Wire
Reinforcing - Exterior |
|
|
 |
 |
 |
 |
 |
||
| Exterior Walls- Single Wythe | ||
| Hot Dip | ||
| Hot Dip after fabrication, ASTM A 153 Class B2, where complete protection from corrosion is required. | ||
  
|
||
| Ladder (Core Clear) | ||
| 16" o.c. ladder design positions cross rods on web of block to allow core clearance. This simplifies rebar installation; centering utilizes strength of grout. Allows unrestricted flow of grout or loose fill insulation into CMU cells. Minimizes re-setting of joint reinforcement around rebar. Improves resistance to shrinkage cracking. Provides stronger bond with cross rods in web of block. Less time devoted to rebar installation, grout pouring. | ||
 Product
Data Sheet |
 MSDS |
|
|
Wire-Bond
Data Sheet |
LEED
|
|
| Truss (Not recommended for reinforced walls) |  |
|
|
Please
click here for further details |
||
| |
||
| Exterior Walls- Multi Wythe | ||
| Hook & Eye Core Clear - Ladder |  
|
|
| Ladder Hook & Eye is manufactured with double eyes flush welded 16" o.c. Out-to-out spacing of longitudinal wires shall be approximately 2" less than the nominal thickness of the block. Eye lengths are designed to span just beyond block or varying widths of insulation. All hooks and eyes are made of 3/16" diameter wire. | ||
| Product
Data Sheet |
MSDS
|
|
|
Wire-Bond
Data Sheet |
LEED |
|
| Hook & Eye - Truss (Not recommended for reinforced walls) | ||
| Please
click here for further details |
 |
|