Wire Reinforcing

Single Wythe:

ladderwire Ladder

(Core Clear)

16″ o.c. ladder design positions cross rods on web of block to allow core clearance. This simplifies rebar installation; centering utilizes strength of grout. Allows unrestricted flow of grout or loose fill insulation into CMU cells. Minimizes re-setting of joint reinforcement around rebar. Improves resistance to shrinkage cracking. Provides stronger bond with cross rods in web of block. Less time devoted to rebar installation, grout pouring.

Product Data Sheet
SDS Mill Galv SDS Hot Dip
LEED


Truss

(Not recommended for reinforced walls)

Multi Wythe:

ladder hook & eye Hook & Eye Core Clear

(Ladder)

Ladder Hook & Eye is manufactured with double eyes flush welded 16″ o.c. Out-to-out spacing of longitudinal wires shall be approximately 2″ less than the nominal thickness of the block. Eye lengths are designed to span just beyond block or varying widths of insulation. All hooks and eyes are made of 3/16″ diameter wire.

Product Data Sheet – Exterior SDS Hot DipLEED


Hook & Eye

(Truss)

(Not recommended for reinforced walls)