OnlineTools:
Grout Grunt™
Scoop, Pass, Pour
- Higher Capacity
- Faster Pours
- Monolithic (easy to clean)
- Rugged Durability, Sturdy
- Lightweight
- Saves time (up to 50% faster), transfer up to 1 cubic feet of material with each scoop.
- For a faster, easier and cleaner method of grouting, no more wall stains.
- Designed for the user and ergonomically friendly.
- Made from high-density HDPE plastic, the Grunt will withstand your toughest jobs.
- Product weighs under 3 lbs empty and approx. 50 lbs full.
- Designed BY a mason FOR masons!
Product Information 
Purchase Online
Smart-T Bolt
Used to form clean-out covers for High Lift grouting.
Product Information Purchase Online
Safety Caps
Protects from hazard of impalement from heights of up to 7 ½ feet. Designed with metal plate molded into 4 inch by 4 inch square top. OSHA Approved!
Supplies:
Grout Stop™
Creates a barrier that stops the flow of grout when filling block wall cells while maintaining positive bond in the mortar joint. This is an effective way to limit solid grouting to upper block courses.
Available in:
- 6″ for 8″ CMU X 100′ Rolls
- 8″ for 10″ CMU x 100′ Rolls
- 10″ for 12″ CMU X 100′ Rolls
Product Data Sheet 
SDS 
LEED Purchase Online
PlateGrip®
The PlateGrip® is a fast efficient way to hold a surface mounted embedded plate in place while grouting. PlateGrip® works on all common size CMU. Easily vibrate around the studs without blowout or plate displacement. It does not interfere with reinforcing.
Grade 60 ASTM A615
Available in:
- #4, #5, #6, #7 & #8 (cut to any length)
#4 Product Data Sheet SDS
#5 Product Data Sheet LEED
#6 Product Data Sheet
#7 Product Data Sheet
#8 Product Data Sheet
Rebar Positioners
(Core Lock)
Diagonal placement in block insures rebar is automatically centered in core every time and prevents any movement. Rebar positioner is “seated” 1-1/4″ deep into core of CMU. One-piece, no weld design. Does not interfere with installation of wire joint reinforcement.
Available in:
Single
- No. 9 Gauge X 8″ CMU
- No. 9 Gauge X 12″ CMU
- Also available in 6″, 10″ & 16″
Product Data Sheet SDS Mill Galv LEED
Purchase Online 8″
Double
- No. 9 Gauge X 8″ CMU
- No. 9 Gauge X 12″ CMU
- Also available in 10″ & 16″
Product Data Sheet SDS Mill Galv LEED
Rebar Positioners
(Standard)
Holds the rebar in position until the grout is set.
Available in:
- No. 9 Gauge X 8″ CMU
- No. 9 Gauge X 10″ CMU
- No. 9 Gauge X 12″ CMU
- Also available in 14″ & 16″
Product Data Sheet SDS Mill Galv LEED
Purchase Online – 8″ Purchase Online – 12″
Rebar Splicers – Screwlock
For mechanically joining deformed reinforcing bars, special steel sleeves applied over rebars on-site. Connection achieves the specified ultimate tensile strength as well as the yield strength of the bars themselves, as required by design codes in the United States.
Rebar Splicers – Threaded Couplers
Used with bars that have matching exterior threads cut or rolled directly onto the ends of the reinforcing bars.
Tie Wire
- Tie rebar laps
- Tie insulated blankets together
- Tie winter protection to the scaffolding
Available in:
- 3.5lb Roll
AC100+Gold Quickshot (Cold Weather)
The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges and mixing nozzles. The AC100+ Gold is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials.
To be used with a 10 oz caulk gun.
Available in:
- 10 oz tube
Anchor Bolts
Used to attached the parapet nailer on the CMU wall.
- Hot Dip Finish
Available in:
- 1/2″ x 6″ w/ Nut & Washer
- 1/2″ x 8″ w/ Nut & Washer
- 1/2″ x 12″ w/ Nut & Washer
- 1/2″ x 16″ w/ Nut & Washer